超声波风速仪,位置传感器,液位传感器,超声波风速风向仪,便携式气象站,玻璃车床,放射性检测仪,颗粒物采样器,玻璃金属封接设备,气体流量校准仪

产品资料
产品[

玻璃**

]资料
如果您对该产品感兴趣的话,可以 产品名称: 玻璃**
产品型号: 148/10/100 WS WK
产品展商: Arnold
关注指数:2796
产品文档: 无相关文档

简单介绍

148/10/100 WS WK 机器盒式喷灯-玻璃**,表面混合,水冷 为氢气和氧气 盒式喷灯总长:500mm, 盒式喷灯火焰宽度:100mm。10排喷嘴。该玻璃**优点:低噪音。稳定一致的火焰。极高的热容量。适合加工石英玻璃。 可用于石英扩管机和旋盘机上。

玻璃**

   的详细介绍

德国ARNOLD提供一流的148/10/100 WS WK  机器盒式喷灯-玻璃**,表面混合,水冷

为氢气和氧气

盒式喷灯玻璃**总长:500mm, 盒式喷灯火焰宽度:100mm10排喷嘴。

该玻璃**优点:低噪音。稳定一致的火焰。极高的热容量。适合加工石英玻璃。可用于石英扩管机和旋盘机上。
 

玻璃**技术信息Important information for this type of burner:

1.The connections of the media as well as the cooling water supply are shwon at the following layout.
供水冷和供气

  1.1  Especially at the gas connection it has to be regarded that there is a screwing with left-handed   thread in order to avoid any confusion. 
  The gas pipe – 12 mm diameter – also served as clamping for a burner holder.
          
螺纹**气管,  气管管径 -12mm,
1.2 
It is not permitted to operate the burner without water cooling.
  In order to guarantee the burner cooling, the water flow temperature should be around 20°C.
  If the flow temperature is less than 20°C there can be formed condensation water. 
  The outlet temperature of the water depends on the power (flame intensity) of the burner. But   it should never be mor than 50 °C. 
           玻璃**
必须要水冷, 水流温度约20°C。如果低于20°C,会产生冷凝水。出口水温取决于喷灯火焰强度。但不应超过50 °C

1.Flame width and flame adjustment
火焰宽度和调整
2.1  Due to the small long flame zone the burner can be used for joining processes as well as for   forming processes. The burner only has to be turned by 90 ° in the burner holder.
          
由于小而长的热区,喷灯可用于焊接和成型工作。喷灯要转90 °在喷灯支架。
2.2  At the flame adjustment it has to be regarded that the oxygen ratio is not too less. Thus the   flame is directly pulled into the burner nozzles. The highest flame temperature is then at this   area. This can lead to overheating and burning of the nozzles.

                    火焰调整氧气率不能太小。火焰会直接拉入喷嘴。高火焰温度在该地方。这导致过热,烧毁喷嘴

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

联系我们
产品目录
Copyright© 2003-2018  培德国际有限公司上海代表处版权所有   联系人:卢先生  联系电话:021-62794500, 021-62790588
传真号码:021-62792664 公司地址:上海市北京西路1277号国旅大厦1707室